OldCar.com Logo

Parts/Accessories For Sale

120 Listings
> Add your zip code ▿
Private Party Sellers
Click here to place your ad now!
1969 THROUGH 1972 PONTIAC GRAND PRIX PARTS Large collection! ALSO PARTS CAR COULD BE AVAILABLE. Call for details.
1976 DODGE 4X4 Government owned, title, not wrecked, 361 engine, engine turns, automatic, rust free. For parts or project. $3,500.
$3,500
2024 EVERYTHING AUTOMOTIVE 42ND ANNIVERSARY SWAP MEET 9-8-2024 AND CAR CORRAL 2024 DATE FOR OUR 42nd ANNUAL BLACK HILLS SUPER SWAP MEET AND CAR CORRAL DATE SET: FREE ADMISSION @ 10AM. VENDOR/CAR CORRAL SPACES STILL THE SAME PRICE AS PAST 20 YRS. SUNDAY SEPT. 8th, 2024. Remember, the Swap Meet is ALWAYS THE SUNDAY FOLLOWING LABOR DAY. Thank You All For AGAIN For Attending the 2023 41st Swap Meet. You Make this the Largest Swap Meet and Car Corral in 400 miles. It was Cool at 5am. But became a beautiful day. The great crowds were waiting for the gates to open
1967 PONTIAC WHEELS 8 LUG WHEELS... 8 LUG WHEELS... Four Original Pontiac 8 Lug Wheels and brake drums.......rare and in good shape......priced to sell We have some extra wheels, drums, trim rings and center caps if you need any???? This is for the Wheels only car not included!!! Check us out for lots of other Pontiac parts..........
$1,500
1966 FORD F-100 PARTS OR PROJECT PICKUP 1966 Ford F-100 Parts or Project Truck. Good parts/project truck, no engine or transmission. Engine: x. Trans: x. Mileage: x. Price: $1,000
$1,000
1966 FORD F-250 PARTS OR PROJECT PICKUP 1966 Ford F-250 Project or Parts Truck. Good parts/project truck, no engine or transmission, seat and steering column included, not shown. Engine: x. Trans: x. Mileage: x.
$1,000
55-57 FORD THUNDERBIRD FRAMES 1955, 1956, 1957 Ford Thunderbird frames available for sale. $2,300.
$2,300
1968 BUICK GS CONVERTIBLE A tree branch fell on this GS 400 convertible and caused the damage shown to the glass, windshield header, and top. The car runs and dives good as is but will obviously need a number of components repaired and replaced as you can see. Its equipped w/AT, AC, PS, PB, and Power Top, etc. Drive it home today!
$10,900
1968 CHEVROLET CAMARO Hard interior fire, needs complete interior, dash and top panel, roof, hood, etc. Power plant is a 250 6cyl, w/ 4spd trans. Car has solid floors, trunk, rockers, and exterior sheet metal. Bill of Sale Only.
$8,900
$4,900
1957 FORD FAIRLANE 500 REAR CUT You are looking at a rear cut from a '57 Ford Fairlane. We were gonna make a desk or couch from this cut. After taking final measurements we realize that it would not fit in rec room. Just too big for our house. Anyways it can be used for an out door rear canopy of your shop or garage, business etc. I have way more invested in this than the $1,000 I'm asking. I bought car at auction 550, hauled from Duluth to Rochester 350, stripped from car 500, sand blasted and primed 400. So you can see this
$1,000
$2,900
$1,000
1953 PLYMOUTH SAVOY PARTING MANY OPTIONS Parting 1953 and 1954 Plymouths. Includes 2 and 4 door hardtop, sedans and Wagons. Many excellent parts including rust free body panels, mechanical parts and many optional parts. No parts to big or to small. We ship worldwide. We Specialize in Mopar cars and parts from the 1930's through the late 1970's. If you don't see what you are looking for please submit a request through the email or on the phone at 605-348-4926
1955 DODGE CUSTOM ROYAL PARTING MANY OPTIONS Parting 1955 and 1956 Dodges. Includes 2 and 4 door hardtop, sedans and Wagons. Many excellent parts including rust free body panels, mechanical parts and many optional parts. No parts too big or too small. We ship worldwide. We Specialize in Mopar cars and parts from the 1930's through the late 1970's. If you don't see what you are looking for please submit a request through the email or on the phone at 605-348-4926
FORD TOOL OR DETAIL BOX $59.00 Ford or Chevy Tool or Detail Box $59.00 2 for $100.00 plus shipping. Hi John please let me know how much this will cost thanks Points tuneup if it needs , dome light says bulb broke when i took out cover in glove box , battery dead maybe needs a charge car runs real rough thanks for taking a look also gas line to carburetor filter side Wes leaking but I tightened it seems not to leak now also if you can replace battery cables on engine seems to be coming apart please give me a call or text
1997 FORD THUNDERBIRD ENGINE - PARTING OUT THE T-BIRD COUPE Will part out this car great, quiet running 4.6L V8 engine at $999, Automatic AOD trans $600, 8.8 Rear Diff, disc brake unit $600. Pass. door $300, front clip $1,000, Gray cloth buckets & console $500, Full set of '99 GT Mustang 5 bolt wheels & tires $500, 5 speed manual GT Mustang with conversion parts $1,000, 4 speed trans 70's GM midsize $1,000, Ford 9 inch center sections any ratio and any combination available. Price starts at $799 exchange. All other items call for availability. Car was hi
$999
1954 DODGE 241 HEMI ENGINE 1954 241 cubic inch Red Ram Hemi. It is unknown what this came out of or how many miles are on it. The numbers - VT334-372 decode to this engine. It appears as though it is a Mohawk Chief replacement engine based on the tag that was attached to it. The engine turns freely and is equipped with a 2 barrel carb and manifold. She'll obviously need some work and most would want to rebuild her before dropping it into anything... but, for that nasty rat rod, this might be the perfect match.
$2,000
1968 PONTIAC LEMANS This is a 1968 Pontiac Lemans project car. It’s a factory M20, Muncie 4-speed, bucket seat car with what is believed to be an original high horse 350 cubic inch engine. This could be an excellent parts car to build a 4-speed GTO clone, or to restore and own a very rare LeMans. This car will need the front clip straightened or replaced. The engine runs very well, and the transmission appears to shift properly. However, a front collision moved the drivetrain enough to where it’s not drivable.
$6,500
1936 FORD 2 DR. SEDAN 1936 Ford 2 Door Sedan - Stock #646P Building a Custom or Rat Rod? Check this one out. Real decent body and fenders. Will need front floors. Has the windshield frame and most of the garnish moldings. We will assist with transport. $2,500
$2,500
1963 CHEVROLET 4 DR. HARDTOP Lots of good parts on this one or buy the whole car. Has a 6 cylinder motor and a standard transmission. The motor is free. Lots of chrome parts inside the car. Let me know what you need! Stock #1610.
1971 CHEVROLET CHEVELLE CONVERTIBLE PARTS CAR Call or Inquire with your needs for Pricing on this parts car.
1970 BUICK SKYLARK CONVERTIBLE MISC PARTS AVAILABLE. CALL FOR PARTS AND PRICING
1963 WILLYS OVERLAND JEEP STATION WAGON 1963 Willy Overland Jeep Station Wagon - Stock #519P Lots of good parts here. Call Dick for info. Let me know what you need!
1900 FORD 302 V8 W/ C4 TRANSMISSION Complete engine and transmission
$795
1962 CHEVROLET PICKUP 1962 Chevrolet Pickup - Stock #651P Lots of good parts. Let us know what you need. Good N.D. Title Call and let us know what you need!
1960 CORVETTE CHASSIS RESTORED 1960 Corvette Chassis Restored to super show condition ….. all correct for judging . www.vintagecorvettes.com 706 857-3916
1969 CHEVROLET CHEVELLE 12 BOLT 2.56 OPEN REAR END 1969 Chevelle 12-bolt, 2.56 open, code CN 1204B
1969 CHEVROLET CHEVELLE 12 BOLT 2.73 REAR END 1969 Chevelle 12-bolt, 2.73 (large ring gear), code KD 02 7B
1979 TRANS AM/CAMARO 3.73 POSI REAR END 1979 Trans Am / Camaro, 3.73 posi, original code PT G1131
1969 CHEVROLET CHEVELLE REAR END 12-bolt 3.31 posi / ‘69 Chevelle 396 code CF 0117 B (E)
$1,500
1967 67-68 CAMARO 396 Block Casting# 3916323. Engine Code MW. 1967-68 Camaro 325HP
$2,950
$900
$1,000
1957 CHEVROLET PARTS MANY MANY PARTS PARTS Many parts for classic cars...... Parts plus more............ Our back yard full of body's and a shop full of goodies too many to list.......give us a call or stop in and take a look for yourself....
1967 CHEVROLET CAMARO COUPE Call for component availability and parts pricing.
1955 CHEVROLET FRAME Frame w/ front suspension, solid and rust-free: $1800 Chevelle 12 bolt open rear end: $1350 350 V8 engine: $850 TH 350 Transmission: $300 Radiator Support: $200 Radiator: $150
1970 BUICK SKYLARK 2 DR. COUPE Rust-free, stripped roller as shown. Original A/C car. Available as poarts or complete as shown.
$4,950
STUDEBAKER PARTS Studebaker Parts - W100 We have a massive amount of vintage Studebaker parts that we would prefer to sell reasonable to one buyer. Call Dick at 701-720-6823
1941 CHEVROLET 2 DR. COUPE 1941 Chevrolet Coupe - Stock #2018 If you are looking for parts, let me know what you need. If you want the complete car, it is $800.
$800
1972 OLDSMOBILE CUTLASS 350 W/AT, hard front end hit as shown, tons of nice parts. Call for component pricing and availability.
1968 CHEVROLET IMPALA REAR END 10 bolt 3.36 open. Code EU 1130G2. Complete take-out w/control arms and pan hard bar.
$500
1965 FORD FAIRLANE 500 2 DR. HARDTOP 1965 Ford Fairlane 500 - #2340 Nice project hardtop with minimal rust and not bad for dents. The motor and transmission have been pulled. Has all the glass and seats are there. Decent trim. Does have a rust spot from acid below the battery tray. Good North Dakota Title and we will assist with delivery. $1,900.
$1,900
1947 FORD TRUCK BOX 1947 Ford Box - #655P Very nice Ford embossed script box from a 1947 Ford Truck. Measures 9 feet 1 1/2 inches long and 7 feet 4 inches wide. Has "Ford" embossed on the rear. Call 701-720-6823!
1953 CHEVROLET PROJECT/PARTS CAR 1953 Chevrolet - Stock #1283 Lots of good parts here. Let me know what you need. $700 for the complete car!
$700
1954 CHEVROLET CAB 1954 Chevrolet Cab - Stock #1834P Decent cab for your project! Has some dents in the roof and the floors will need some work. Needs cab corners. Structurally sound. The cab is $1,600 and the front clip is $350. We will assist with transport.
$1,600
1972 OLDSMOBILE CUTLASS Rolling frame and body shell as shown. Available complete or for parts - call for component pricing.
1972 CHEVROLET NOVA PARTING OUT – This Sky Roof equipped Nova is clobbered up front and the damage transfers through the frame and well into the body and floor. Power plant is a performance upgraded 350 w/ 4 spd. and an 8.5 GM 10-bolt with 3.08 gear. Call for availability and pricing of components.
1965 CHEVROLET NOVA WAGON Front damage up and over the bumper as pictured, needs a pull for cowl / door alignment plus sheet metal as shown. Power is supplied by a 350 V8 w/ TH 350 trans and a 10-bolt rear end. This is a nice, solid little cruiser project with clean sheet metal, floors, and a very nice interior
$12,900
1940 FORD DELUXE SEDAN 1940 Ford Deluxe Sedan - Stock #1630 Parts car. Let us know what you need!
1938 FORD DELUXE SEDAN 1938 Ford Sedan - #560P This is the 1938 Ford Deluxe Sedan. Rough around the edges but still a lot of good parts. Let me know what you need!
1964 DODGE 330 4 DR. HARDTOP 1964 Dodge 330 - #2314 We may part this one out or sell it complete. Has the slant 6 motor and automatic transmission. We never turned the motor. Also has factory power steering. Very nice front clip. Let us know what you need. Complete car. We will assist with delivery. $950
$950
1948 FORD TRUCK CAB 1948 Ford Truck Cab - Stock #583P Real decent cab with solid floors. The cab corners will need a little work. The door bottoms look okay but may be thin when you sand blast them. Good N.D. Title and we will assist with delivery. $1,800
$1,800
1963 FORD PICKUP Lots of good parts on this pickup. The cab floor is rusty. Has a good running Y block motor. Real decent box for $500. Rear differential has been sold. Let me know what you need! Stock #843
1956 FORD CAB 1956 Ford Cab - Stock #643P. This cab has the usual cab corner and cowl tip rust. Floors will need some work as well. Real decent cab! Delivery assistance available. $1,650
$1,650
2021 FIRESTONE AIR-RITE AIR COMPRESSOR 12V MODEL WR1-760-9523 COMPLETE NEW! FOR PAINT AIR BRUSHING ETC. We bought this small Firestone 12V air compressor DC 13.0 Amp. for a Car Project, but It would not work for what we needed. Model Number is WR1-760-9523. 0521-33832. Comes with the air hose. Unit with base is 6.75 inches long, and 2 inches wide. We paid just about $110 with the tax and shipping. SO, WE ARE SELLING FOR $85.00. OUR LOSS IS YOUR GAIN. CAN BE USED FOR PAINT AIR BRUSH WORK, OR ANY LIGHT DUTY AIR COMPRESSOR NEEDS. Call Bill @ Motion Unlimited Museum. Rapid City,
$85
1970 CHEVROLET PONTIAC PARTS PARTS 1930 TO 1987 2 DOOR HARDTOP PARTS 1930 TO 1987 ALL MAKES CHEVY FORD PONTIAC PARTS
1978 PONTIAC TRANS AM 2 DR. COUPE Project or Parts. 400 V8 w/ AT.
1969 CHEVROLET NOVA 2 DR. COUPE Solid Front End Hit as Shown. 250 6 cyl w/ AT. 10-bolt rear end. Rust-free body. Solid bench seat interior. Call for parts pricing and availability.
1968 CHEVROLET IMPALA Impala Custom Coupe, 327 (Original Numbers Matching) Power Glide AT, Excellent Black Interior, disc brake fronts, 10-bolt rear end, rust-free body parts, polished moldings, etc. Call for parts availability and pricing!
1985 GMC SIERRA PICKUP 5.7 V8, AT, AC, PW, PL. Damage up front as shown. Runs well! Potential for repair or great for rust-free parts!
$3,750
1941 FORD 2 DR. SEDAN 1941 Ford 2 Dr. Sedan - Stock #631p. This is one we are going to part out. Lots of good parts. Let us know what you need. It is sitting on a frame from something else but the original frame and VIN are there and good. Let us know what you need!
BUICK ENGINE 350, 4bbl. Removed from Garage Fire. Total price is less brackets and accessories
$850
12 BOLT 1ST GENERATION NOVA/CAMARO REAR END Fully Chromed, 3.73 posi, code-correct from a 68' Nova SS. BR(3.07 posi-changed to 3.73) 0620G(June 20th, Detroit Gear and Axle) E(Eaton posi diff.)
$2,300
1955 CHEVROLET PARTS CAR Hard hit parts car as shown. Power is an iron-head small block w/4spd muncie transmission, Ford 9" posi rear. call for parts availability and pricing!
12 BOLT CHEVELLE DISC BRAKE Wilwood disc brakes
$1,800
2016 HARLEY DAVIDSON FLTRXS Rear plus light lay-down damage as shown, needs bolt-on rear frame section, transmission case, fender, bags, lamps, etc. We have most of the parts available for sale.
1998 HARLEY DAVIDSON FLHRCI ROAD KING CLASSIC MOTORCYCLE FOR PARTS STK# 00615 - 1998 FLHRCI Road King Classic. Parting out as shown....
$1,350
$3,950
1969 CHEVELLE 12 BOLT REAR 12 bolt (CN 1204 B) 2.56 ratio (open) with Tom's Kick Ass Axles and complete with control arms, sway bar and HD suspension supports.
$1,300
$1,100
$125
$250
10 BOLT CHEVELLE 3.73 POSI Complete w/ Edelbrock Control Arms and Sway Bar. Code GCC
$1,450
$400
1974 AMC JAVELIN 2 DR. COUPE AZ Location Solid hit on the left front as shown. This is a rust-free car with potential to rebuild or nice quality parts for your project. Powerplant is a 360 V8 w/ AT.
1970 CHEVROLET C10 PICKUP PARTS TRUCK......1970 Chevrolet C-10 Pickup. Hard roll over with heavy cab, front end, suspension, misc. damage. This rust-free truck has tons of great parts. Did we mention that it's an original BIG BLOCK truck with FACTORY A/C? Call Tofte Auto Sales at 320-598-3770 for parts availability, pricing, more info.
1970 BUICK SKYLARK CONVERTIBLE PARTS CAR PARTING OUT...….1970 Buick Skylark Convertible. This car is available for parts only. Engine is a solid-running 455 with some mild performance upgrades, transmission is a Turbo-Hydro.The wheels, bumpers, fenders, and many other parts have already been sold. Call with your needs and for pricing.
1967 DODGE DART PARTS CAR PARTING OUT OR COMPLETE Complete Roller less Engine, Transmission and Interior. Available as parts only or complete. Inquire for parts pricing. Bill of Sale Only.
$3,850
1970 OLDSMOBILE CUTLASS RALLY WHEELS 14x6 Rally wheels in very nice condition!
$500
1969 CHEVROLET 250 6 CYL. ENGINE WITH TH350 TRANS. 1969 Chevrolet 250 six cylinder engine with TH 350 trans. Real solid running little six banger, complete bolt-in ready, available with or without TH 350 transmission.
2013 POLARIS RAZOR 800 Parting out this new 2013 Razor 800. Transmission, clutches, axles, suspension, differentials, and more. Call with needs.
1953 CHEVROLET FRONT CLIP 1953 Chevrolet Front Clip - Stock #617P Real decent clip with only minimal rust. Grill and surround look to be all re-chromeable. $500 for all
$500
1938 CHEVROLET COUPE 1938 Chevrolet Coupe - #624P Has a few parts left on this one. Let me know what you need!
1934 FORD PICKUP CAB 1934 Ford Pickup - (#618p) This cab has lower body rust in the body and floor structure. The left door is missing. Dash and windshield frame are there. Find a door and here is a great start on a rat rod pickup. Delivery available. $1,500
$1,500
$350
1929 FORD TUDOR BODY 1929 Ford Tudor Body - #1174. If you are looking to build a rat rod, here is the ever popular '29 Tudor. Has some lower rust like most but very repairable. Comes with an extra back panel for the damage by the rear window. Great start on one here! We can line up transport if needed.
$2,000
1941 CHEVROLET COUPE Rat rod, street rod, hot rod candidate. Independent front suspension, 4-link rear, solid project car.
$2,250
TOUR PACK Blue in color
$450
DETACHABLE TOUR PACK Burgundy in color
$550
$600
2006 TWIN CAM 88 Engine only - $1,450 or complete as shown - $1,950. Low miles.
1985 EVO 80" Removed from a garage fire damaged bike. Complete as shown.
$1,450
1970 CHEVROLET CAMARO PARTS 1970 Chevrolet Camaro Parts. Complete set of floor pans including trunk floor, rear body panel and supports, radiator support, 1/4 panel sections, cowl top panel, fuel tank supports and more.
$1,450
2007 TWIN CAM 96 Complete as shown.
$1,750
2011 TWIN CAM 96 Engine Only-$1,450 or Complete as shown-$1,950
1 2
Top